In past years, many visitors were curious about the waterfall visible from the Pit Viewing Stand. Montana Resources pumped water out of the Berkeley Pit, then removed the copper from that water before returning it to the Pit (click here for more information on mining copper from Pit water). The waterfall was created by this returning water. However, this activity stopped after the 2013 slough (click here for more information on the slough), so there is no longer a waterfall on the Pit rim.
Over 31 years ago economic factors led the Atlantic-Richfield Corporation, or ARCO, now a subsidiary of British Petroleum, to cease mining operations at the Berkeley Pit in Butte, Montana. Underground mining had come to an end seven years earlier, but the underground pumps had continued to operate, pumping groundwater out from the mines and the Berkeley Pit.
The 1982 suspension of mining coincided with the stoppage of pumping, allowing groundwater to begin rising in the underground mines and eventually into the Berkeley Pit.
With ARCO’s suspension of mining in the neighboring East Berkeley Pit (now known as the Continental Pit) on July 1, 1983, the future of mining on the Butte Hill was uncertain at best.
Soon after, the Berkeley Pit was classified as a federal Superfund site by the United States Environmental Protection Agency (EPA). According to the EPA, a Superfund site is an uncontrolled or abandoned place where hazardous waste is located, possibly affecting local ecosystems or people.
The end of mining at the Berkeley also marked the beginning of the Berkeley Pit lake we see today. 3,900 feet deep underground in the Kelley Mine , the pumps used to dewater the underground mines and the Berkeley Pit ran until April 23, 1982. Without pumping, the Berkeley Pit began to fill with water flowing in from both surface runoff and groundwater. Due to the natural geochemistry of the area and mining activities, the water is highly acidic and contains high concentrations of dissolved heavy metals.
By 1985, ARCO had sold a portion of its holdings to Montana businessman Dennis Washington. Mining operations in the Continental Pit, as well as heap leaching of old Berkeley Pit leach pads, were resumed by his new company, Montana Resources.
The water level at the Berkeley Pit has been recorded every month for more than 23 years. In addition to that monitoring, scientists at the Montana Bureau of Mines and Geology have been sampling and analyzing water from the Berkeley Pit twice a year for its chemical composition and physical properties.
In the Berkeley Pit, samples are taken from anywhere between three to nine different depths and analyzed for various dissolved chemicals.
Water quality conditions, such as temperature, pH, specific conductance, and dissolved oxygen, are also measured at five- to ten-foot intervals from the surface to a depth of 600 feet. These same conditions are also measured at a depth near the Pit bottom.
In past years, the Berkeley Pit was a chemically layered system, which means that the chemistry of the water changed with depth. The brownish-red water at the surface was actually the least contaminated water in the pit, and the lower layer the worst water quality. The color changed as well, going from brownish-red on top to bluish-green at the bottom.
At a certain depth, the chemistry of the water changed so rapidly that it formed a chemical boundary scientists refer to as a chemocline. Water above the chemocline was chemically lighter, in other words, less dense, than the water below. The layering of the two waters is similar to oil floating on water. The water above the line was also less acidic (higher pH), with lower concentrations of metals.
Due to mixing in the Berkeley Pit lake over time, this previously layered system disappeared around 2012, and the Pit water has since become more uniform.
Butte’s Memory Book tells the story of Jim Ledford, a miner who lived in a log cabin below the famed Anaconda Mine. Alongside his cabin was an old dump containing scrap iron and tin cans. Mine water ran downhill through the dump, and Ledford noticed a heavy sludge formation. Out of curiosity, he had the sludge assayed and learned that it was 98-percent-pure copper.
Legend has it that Ledford told no one about his discovery. Instead, he quietly secured a one-year contract to handle the Anaconda mine water. He set up tanks, filled them with scrap metal, and ran the water through them. The undated account said his efforts earned him $90,000 that first year. His contract was not renewed.
A professional paper from a 1913 Butte mining conference tells a slightly different story. It states that in 1890 a William Ledford obtained a contract to handle water from the St. Lawrence Mine. The story ends the same, however, once the Anaconda Company realized the value of mine water, it built its own copper tanks, and copper precipitation using scrap iron became standard operating procedure. Thanks to Al Hooper for loaning his copy of the 1913 mining conference proceedings.
A third version of the story was relayed in the April 18, 1906 edition of The Montana Standard as part of a series of articles on “Queer Spots in Butte.” According to this version, in 1888 an old Welshman named Morgan who lived on the Butte Hill noticed copper dust left behind from tin cans thrown into a gully filled with runoff water from the mines. Morgan had the dust assayed and learned that it was almost pure copper. He experimented with the concept and developed a rudimentary precipitation plant, but died a few months after he had his plant operating successfully.
The story goes on to claim that a Butte Dutchman named Fred Miller dug holes in the side hill in the gulch below the St. Lawrence mine. He filled these holes with tin cans and scrap iron, allowing mine runoff water to flow over them.
For the next two or three years, he would collect the resulting copper dust every few weeks. Miller fraudulently claimed a monopoly on this system, and on several occasions tried to bluff out others on the hill who were experimenting with precipitation. The story notes that at this point William Ledford secured a lease to the St. Lawrence water, and Miller’s heyday came to an end.
This method of copper recovery was not new: it dates back to medieval Europe. The Anaconda Company used it for years to recover copper from the water pumped from the underground mines, and the method is still used today. Montana Resources has mined copper from the rich mineral waters of the Berkeley Pit since 1998, pausing when mining operations were suspended from 2000 through 2003, then resuming in 2004 until a Pit slough in 2013 knocked out the necessary pump. The mine pumped out roughly 13 million gallons of Pit water per day, or about 10,000 gallons per minute.
In copper precipitation, the Pit water is piped to the company’s precipitation plant, built in the 1960’s next to a similar one from decades earlier. The water flows into concrete cells filled with scrap iron, and then chemistry takes over. Simply put, the iron in the cells and the copper in the water trade places. The water is returned to the Pit with a higher iron content, and the copper precipitates, or solidifies out of solution, clinging to the remaining iron.
The chemical reaction does not take long. Water stays in contact with the iron for only about an hour, and then it flows back into the Pit through a separate ditch along the old Horseshoe Bend channel, which could be seen from the viewing stand as the waterfall on the northeast rim of the Pit. Mine officials say that this constant circulation process should not affect the water level of the Pit, nor should the change in water chemistry have an effect on eventual water treatment operations.
Once per week, crews drain each cell to recover the precipitated copper. A front-loader scoops up the copper and scrap iron mixture and transports it to a vibrating screen. Water sprayed from high-pressure hoses knocks the copper through the screen into a tank below. Remaining iron goes back to the cells for reuse. The cement copper concentrate is then shipped to the concentrator and processed through a filter press to reduce the water content for rail shipment. By pumping water from the Berkeley, the company recovered about 400,000 pounds of copper per month.
The company also routed copper-rich Horseshoe Bend water through the precipitation plant from 1998 until the mine shutdown of 2000. The sale of this precipitated copper helped to offset water treatment costs. Once through the precipitation plant, Horseshoe Bend water was mixed with lime (calcium hydroxide) and pumped north to the Yankee Doodle Tailings Pond.
Since the treatment plant went online in 2003, this Horseshoe Bend water has been kept out of the precip plant circuit.
The equation below shows the main chemical reaction that takes place during the copper precipitation process:
Fe + CuSO4 becomes FeSO4 + Cu
No, not at the present time (2013), although Montana Resources did ‘mine’ the Pit water in the past.
From February 2004 until February 2013, approximately 13 million gallons of water per day were been pumped out of the Berkeley Pit and up to a precipitation plant. The water was collected at various depths, and was pumped up and around the south and east walls of the Pit to the precipitation plant northeast of the Pit.
The precipitation plant used a centuries-old technology where the acidic (pH of about 2.5) and copper-rich water flowed through piles or “cells” of recycled scrap iron. The process is known as “cementation.” The iron in the cells and the copper in the water trade places through a replacement reaction. The iron-rich water was returned to the Pit, creating the waterfall previously seen on the north rim near the Horseshoe Bend Plant. The product, containing about 70% copper, was dried through a filter press and then sent to an off-site smelter.watch full Julian Schnabel: A Private Portrait 2017 film
For more on the topic of mining the water, click here.